Bluetooth® Audio Playback; Music Playback Using Bluetooth Wireless; Technology; Pairing With The Unit (Initial Registration) - Pioneer X-SMC00 Manual

10 Bluetooth® Audio playback
Chapter 10:
Bluetooth

Music playback using Bluetooth wireless

technology

Bluetooth wireless technology
Bluetooth wireless technology
Device not equipped with Bluetooth
Bluetooth
Music data
The unit is capable of playing back music stored on Bluetooth
capable devices (cell phones, digital music players etc.)
wirelessly. You can also use a Bluetooth audio transmitter
(sold separately) to enjoy music from devices that do not have
Bluetooth functionality. Please refer to the user's manual for
your Bluetooth capable device for more details.
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.
28
En
®
Audio playback
enabled device:
Cell phone
enabled device:
Digital music player
wireless technology:
Digital music player
+
®
audio transmitter
(commercially available)
POWER ON TIMER
PUSH OPEN
AUDIO IN

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a Bluetooth
capable device, pairing must first be performed. Pairing
should be performed when first using the unit with the
Bluetooth capable device, or when the pairing data on the
device has been erased for any reason.
Pairing is a step required to allow communication using
Bluetooth wireless technology to be carried out.
• Pairing is only performed the first time that you use the
unit and the Bluetooth capable device together.
• In order to allow communication using Bluetooth
wireless technology to take place, pairing must be
performed on both the unit and the Bluetooth capable
device.
• After pressing the BT AUDIO and switching to BT
AUDIO input, perform the pairing procedure on the
Bluetooth capable device. If pairing has been performed
correctly, you will not need to perform the pairing
procedures for the unit as shown below.
Please refer to the user's manual for your Bluetooth capable
device for more details.
Press the 1 STANDBY/ON and turn the
1
power to the unit on.
2 Press the BT AUDIO.
The unit will switch to BT AUDIO.
Turn on the power to the Bluetooth capable
3
device that you wish to pair with, and perform
pairing procedure on it.
Pairing will start.
• Place the Bluetooth capable device close to the unit.
• Please refer to the user's manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
4 Confirm that PAIRING is being displayed,
and then press the ENTER.
Use HI to select the PIN code and press
5
the ENTER.
Set the PIN code for the unit to the same PIN code as the
Bluetooth capable device. The three PIN codes that the unit
can be set to as are: 0000 / 1234 / 8888 (factory setting is
0000).
• Press the ENTER and PAIRING display will flash.