Connections; Connecting A Personal Computer; Connect The Lcd Monitor To A Personal Computer - NEC MultiSync LCD8205-P User Manual

Connections

Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user manual included with each separate piece of equipment.

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards and a pixel clock over 162MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480 31.5kHz
800 x 600 37.9kHz
1024 x 768 48.4kHz
1280 x 768 48kHz
1360 x 768 48kHz
1280 x 1024 64kHz
1600 x 1200 75kHz
1920 x 1080 66.6kHz

Connect the LCD Monitor to a Personal Computer

• To connect the DVI IN connector on the LCD monitor, use the supplied PC - Video RGB signal cable (DVI-D to DVI-D,
DVI-A to mini D-sub 15 pin).
Remarks
Vertical
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz Compressed image
60Hz Recommended resolution
To analog RGB output
English-12
To audio output
Mini D-sub 15 pin
Personal
To DVI output
Computer
DVI-D connector
LCD monitor