Chapter 8
FAR END
MAIN CAM
CAM 2
Page 8-8
8.5.3 Remote switching
To switch the transmitted picture sent from the remote site:
Press the FAR END button.
.
Irving
Remote control: Camera 1
The system switches control from local to remote control. This is indicated by the
local message.
Note: Image as seen by the local site.
Press the MAIN CAM or CAM 2 button.
The far site sends the camera selected.
When CAM 2 button is pressed:
Irving
Remote control: Camera 2
Note: Image as seen by the local site.
VisuaLink 128/384 User Guide
NDA-24230 Revision 1.0