NEC VisuaLink 128/384 User Manual page 57

VisuaLink 128/384 User Guide
Key in the number of one of the following
applications.
Applications:
Press CANCEL to page back
Congratulations, you have just finished setting
up your VisuaLink system.
For VisuaLink software updates and general
VisuaLink knowledge, visit the NEC Knowledge
base web site at :
http://www.cng.nec.com
http://www.ilibrary.com/phoenix/ntachome.nsf
/homepagenav?opennavigator
- You may begin to use the video conferencing
- Press ENTER to activate your configuration.
Press CANCEL to page back
NDA-24230 Issue 2.0
Step 2—Optional User Settings
1. Rollabout/Other
2. Data Conference
3. Gateway
4. Desktop
Congratulations Screen
or
system immediately.
The VisuaLink is now setup for the configuration you have entered. Press the
ENTER button on the REMOTE CONTROLLER, the VisuaLink will display a
blue screen and recycle. The VisuaLink should will power up to a normal state.
You may begin to use the video conferencing system immediately.
Note: If there are no My Numbers entered in the configuration the VisuaLink
will display the Start Up screens.
Chapter 4
Page 4-29