Table of Contents
Advertisement
Chapter 4
STEP
25.
Verify that all the equipment plugged into the
power strip are turned to the ON position. The
VisuaLink 128, VisuaLink 384, camera and
monitor have their own power switches. If a
device appears to be still in the OFF position,
check the power connection from the Power Strip
to the device. The NT1 does not have a power
switch. The green LED on the front of the NT1 is
an indication the unit is powered ON.
Note: Make sure the monitor is selected for Video
1.
26.
When the VisuaLink 128 or VisuaLink 384 is
powered ON, a display of the NEC America, Inc
logo, VisuaLink name, POWERING UP and
version number will be displayed on the monitor.
Page 4-22
ACTION
VisuaLink 128/384 User Guide
DRAWING
America, Inc.
VisuaLink
Powering Up
Ver.22.02.37
POWER
HEADSET
POWERLINE
B1
B2
NDA-24230 Issue 2.0
Advertisement
Table of Contents
