Connecting To An Internet Service Provider - NEC MOBILEPRO 900 User Manual

Connecting to an Internet Service
Provider
Once you have established an account with an Internet Service
Provider (ISP) and gathered the necessary configuration information,
you are ready to create a connection on your MobilePro for your ISP
account.
Follow these steps to create a new connection for your ISP account.
Tap Start, Programs, Communication, then select Remote
1.
Networking.
2. Double tap the Make a New Connection icon.
Enter a name for the new connection.
3.
Select Dial-Up Connection as the connection type and tap Next.
4.
Use the drop-down box to select Internal Modem on COM 4 and
5.
tap Configure.
Select the required port settings and call options. Tap OK.
6.
Tap TCP/IP Settings and configure the required General Settings
7.
and Name Servers. Tap OK.
8. Tap Next and enter the required dial-up telephone number. Tap
Finish.
Once your ISP connection is established, you can configure your
MobilePro to send and receive e-mail through your ISP. Follow the
instructions in "Sending and Receiving E-mail" and "Activating a
Connection," later in this chapter, to send and receive e-mail through
your ISP.
For ISP settings, access: http://www.cewindows.net/wce/isp.htm/.
Although not an official NEC web site, this site contains important
information about ISP settings.
5-4 Setting Up a Remote Connection