Dimensions - Toshiba MMU-AP0072H2UL Engineering Data Book

6
Indoor unit
2.

Dimensions

MMD-AP0074SPH2UL, AP0094SPH2UL, AP0124SPH2UL, AP0154SPH2UL, AP0184SPH2UL
0.8"
(20)
4- 0.2"(4)
3.1" 2.3"
(80) (59)
For Fresh Air Intake
(knock-out hole)
0.8"
(20)
Installation space
Note)
1. Indoor unit does not have air filter its inside.
So be sure to set an air filter(local arrangements) in the position
maintained easily such as a air intake grille
(If there is no air filter, dusts are blocked in the air heat exchanger
and it may cause failure or water leak in air-conditioner.)
2. Leave sufficient space to remove the air filter when you attach it.
Air discharge
3.9"(100) or more
15.8"(400)
or more
<Under air intake>
Ceiling
Air intake
3.9"(100)
or more
<Back air intake>
Air intake
Ceiling
11.8"(300)
or more
Unit external dimension 33.3"(845)
Air discharge flange outside
31.7"(805)
Hanging bolt pitch 35.8"(910)
Air intake flange outside
31.7"(805)
Model MMD-
AP0074SPH2UL
AP0094SPH2UL
AP0124SPH2UL
AP0154SPH2UL
AP0184SPH2UL
Service space
Air discharge
Ceiling
2.0"(50)
39.2"(995)
39.2"(995)
193
0.8"(20)
4.1"(103)
1.2"(31)
1.6"(41)
1.3"(33)
6.4"(163)
Electrical control box
0.8"(20)
Unit: in (mm)
A B
Ø3/8" Ø1/4"
(9.5) (6.4)
Ø1/2" Ø1/4"
(12.7) (6.4)
3.9"(100)
29.3"(745)
Ceiling opening size
Refrigerant pipe
connecting port B
(Liquid side)
Refrigerant pipe
connecting port A
(Gas side)
Drain-up port
conduit hole for
power supply cable
Hole for control wire and
remote control wiring
15.8"(400) or less
Indoo r unit
Ceiling bottom
surface
Drain-up standing-up size
Note)
As ABS is used for the drain discharge port of th
main unit, the vinyl chlor paste cannot be used.
Use the flexible hose (Band fix) included in the
package.
e