Setting The Clock - NEC VH-602 User Manual

Setting the Clock

Use the On-Screen Display and the remote control unit to set the clock.
Before You Start
The clock uses a 24-hour system.
When you first plug in your VCR, the clock will read "- - - -".
While you are setting the clock, a menu on the TV screen will prompt you to go through the correct procedure.
If you enter an incorrect number, press CURSOR (
PROCEDURE
1
2
3
4
OK
5
14
F F / G G ) to clear the entry, then enter the correct number again.
Turn on the power of both the VCR and the TV.
Make sure that the TV is set to the VCR output channel.
Aim the remote control at the remote sensor window on the front panel of the VCR.
Press i on the remote control. The menu below will appear on the TV screen.
REC
f
AUDIO
Press CURSOR ( F F / G G ) to select "TIME DATE" and press OK.
HH
- -
1 2
TIME
DATE
A B
1 2 VCR
C
Pr-12
TIME SYS-
PR DR
ACMS
DATE TEM OSD
REC
OSD OSD
ON
OK i
OPR
OFF
MM DD MM YY
: - - . - - .
- - - - - - -
i