How To Install Tcp/Ip - D-Link dge-560t Ethernet Adapter

9. Click OK when you have selected the desired printer. Finish the installation by
continuing the "Add Printer Wizard" normally.
You may now use the Network Printer as if it was connected directly.
NOTE: The computer that the printer is connected to must be "on" to use the
printer. If you find this inconvenient, devices known as Network Print Servers
are available from D-Link including the DP-301 and DP-101P. A Network
Print Server would allow you to directly connect your printer to your network
without worrying about which computer is "on".

How to Install TCP/IP

By default, Internet Protocol (TCP/IP) is included in Windows. However, in
case it is not pre-installed, it can be installed manually.
Go to Start > Settings > Control Panel.
- 21 -