Before First Use; Using The Coffeemaker; Switch Off Time; Filling The Water Reservoir - Philips HD7761 User Manual

Hide thumbs Also See for HD7761:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4 Before first use
4.1 Setting the automatic

switch off time

You can adjust the time after which the appliance
automatically switches off. The default time is set to
30 minutes. You can adjust this time to a maximum
of 120 minutes. If you want to adjust the automatic
switch off time, follow the steps below.
Make sure the appliance is switched off (but
1
the mains plug is in the wall socket).
Press and hold in the centre of the knob until
2
the display starts to flash.
Turn the knob to increase or decrease the
3
time. 1 is 10 minutes, 2 is 20 minutes, 3 is
30 minutes and so on until 12 is 120 minutes.
Press in the centre of the knob to confirm
4
the minutes.
Note:
D
The appliance always saves the last setting.
4.2 Flushing the coffeemaker
You need to flush the coffeemaker once before
first use.
Open the water reservoir lid. Fill the water
1
reservoir with fresh cold water up to the
8-cup indication. (Fig. 2)
Note:
D
Do not put coffee beans or ground coffee in
the coffeemaker.
Close the water reservoir lid.
2
Put the jug in the appliance (Fig. 3).
3
Press the on/off button (Fig. 4).
4
The display lights up.
Press the strength select button (Fig. 5).
5
Turn the knob to choose the pre-ground
6
coffee setting (Fig. 6).
The pre-ground coffee icon lights up.
Press in the centre of the knob to confirm.
7
Then press in the centre of the knob again to
start the flushing process (Fig. 7).
Let the coffeemaker operate until the flushing
8
process has been completed.
Press the on/off button to switch off the
9
coffeemaker.
Empty the jug.
10
5 Using the
coffeemaker

5.1 Filling the water reservoir

Open the water reservoir lid and fill the water
1
reservoir with the required amount of cold
water. (Fig. 2)
When you open the water reservoir lid, there
are indications for 2 to 10 cups on the inside
of the appliance. You can use these indications
to determine how much water to put in the
water reservoir. The reflection changes from
light to dark per filled cup of water. You can
also use the water level indicator on the jug.
Note:
D
Do not fill the water reservoir beyond the
10-cup indication.

5.2 Using coffee beans

We advise you to use light roasted coffee beans
to brew the perfect cup of coffee.
Warning:
B
Always keep the water reservoir lid closed when
you fill the coffee bean container with coffee
beans. Otherwise coffee beans can fall into the
water reservoir and block up the water inlet.
Remove the coffee bean container lid. (Fig. 8)
1
Fill the coffee bean container with coffee
2
beans. Make sure there are enough coffee
beans in the container for the amount of
coffee you want to brew (Fig. 9).
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents