Panasonic DP-C406 Operating Instructions Manual page 17

4
Select "Address Book".
5
Select "SD Card / Hard Drive".
6
Connect the USB Flash Memory.
Push the Slot Cover to open it.
Plug the USB Flash Memory into the USB
Memory port as illustrated.
7
Select "USB Memory".
Only one storage device can be selected at
a time. When the "USB Memory" is selected
as the storage device, the scanned image
cannot be saved to the SD Memory Card
and Hard Disk Drive at the same time.
If the setting of Function Parameter "70 SD/
USB Memory Function" (General Settings
> Key Operator Mode) is set to "No", the
Confirmation screen displays the "Function
not available" error message and beeps.
If you do not touch any key for 3 seconds, or
select "Close" on the Touch Panel Display,
the machine will display the previous
screen.
For more details, refer to General Settings
in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
17