Scan To The Usb Flash Memory - Panasonic DP-C406 Operating Instructions Manual

Scan to the USB Flash Memory

The scanned image will be directly transferred to the USB Flash Memory.
Be sure to use only a USB Flash Memory that supports Mass Storage Class (FAT16 or FAT32 format).
The USB Flash Memory with security function cannot be used.
We cannot guarantee compatibility with all USB Flash Memories.
For details, contact the authorised Panasonic dealer.
The scanned image(s) cannot be saved to the USB Flash Memory if the setting of Function Parameter "70 SD/
USB Memory Function" (General Settings > Key Operator Mode) is set to "No".
For more details on this setting, refer to General Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
1
Place original(s).
For details on how to place originals, refer to
Placing Originals (see page 6) and Basic
Operation Procedure (see page 9).
2
Press the Scan/Email key.
16
USB Flash Memory
3
Select "Basic Menu" to configure the
required settings, and then select
"OK".
Refer to Scanner Settings (See pages 45
to 63).