Hitachi DV-P250U Service Manual page 81

6/17 TEF (DVD-P250e≠^)•X≤M 11/15/99 4:52 PM ≠∂≠±17
TO CONNECT T O A DEVICE EQUIPPED WIT H DIGITAL TERMINAL
You can enjoy Dolby Digital surround by connecting the player to an amplifier
equipped with Dolby Digital input terminal.
°¥ When you want to record DVD sounds corresponding to Dolby Digital or DTS to MD or DAT by a digital
°¥ If the digital input terminal of an amplifier does not correspond to Dolby Digital or DTS, then please do not
°¥ The head out signal is sometimes not correctly recorded when recording a CD or DVD by digital
°¥ This player do not have a DTS built-in decoder , so audio output terminal will not available when DTS disc
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", "AC-3" and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
connection, please preset the digital sound output to LPCM. If the DVD has recorded Dolby Digital or DTS,
it will record noise if digital output preset to DTS/AC-3/MPEG2.
preset the digital sound output to DTS/ AC-3/MPEG2 because noise may be emitted and damage the
speakers.
connection. Please use MD or DAT to edit the head out signal.
source is selected .
34
Do tt ed l in e s , i n di ca te co r ds
purchased separately .
34
34