Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell Edge Gateway 5100 Service Manual

Replacing the solid-state drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.

Procedure

1 Slide the solid-state drive into the solid-state drive slot.
2 Replace the plastic grommet that secures the solid-state drive to the
system base.
3 Place the solid-state drive heat shield on the system board.
4 Replace the screws that secure the solid-state drive heat shield to the
system board.
5 Adhere the thermal pads on the solid-state drive heat shield.

Post-requisites

Replace the top cover.
18
computer. After working inside your
After working inside your