Removing The Dip Switch Board; Prerequisites; Procedure - Dell Edge Gateway 5100 Service Manual

Removing the DIP switch
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the

Procedure

1 Remove the screws that secure the DIP switch board assembly to the
status-light board.
34
computer. After working inside your
top cover.
wireless card.
mobile broadband
base frame.
After working inside your
card.