Replacing The Dip Switch Board; Procedure; Post-Requisites - Dell Edge Gateway 5100 Service Manual

Replacing the DIP switch
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the DIP switch board on the metal frame.
2 Replace the screws that secure the DIP switch board to the metal frame.
3 Place the DIP switch board on the status-light board.
4 Replace the screws that secure the DIP switch board assembly to the
status-light board.

Post-requisites

1 Replace the base
2 Replace the mobile broadband
3 Replace the wireless
4 Replace the top
36
computer. After working inside your
frame.
card.
card.
cover.
After working inside your