FIGURE 3-2 Host System Debug Scheme B
Host
Computer
Media I/F
3•3
Stand Alone Operation
In this mode, the ADS is not controlled by the host via the OnCE port. It may connect to host via
one of its other ports, e.g., RS232 port, Fast Ethernet port, ATM155 port etc. Operating in this
mode requires an application program to be programmed into the board's Flash memory.
20
Freescale Semiconductor, Inc.
Installation Instructions
Command
Converter
14 Wire
Flat Cable
To JTAG/OnCE
MSC8101ADS RevB User's Manual
For More Information On This Product,
Go to: www.freescale.com
36Wire
Flat Cable
5V Power Supply
Host
Device
MOTOROLA