P5, P7, P8, P9, P10, P13, P14 - Logic Analyzer Connectors; P6 - Jtag/Once Port Connector; Table B1-6 - Motorola MSC8101 ADS User Manual

Motorola msc8101 ads motorola metrowerks user's manual
Table of Contents

Advertisement

TABLE B1-5. P4 - Host Interface Connector - Interconnect Signals
Pin No.
Signal Name
30
HDS
31
HRESETb
32
PORSTb
33
3V3
34
N.C.
35
GND
36
B•1•5

P5, P7, P8, P9, P10, P13, P14 - Logic Analyzer Connectors

These are 38 pin, SMT, high density, matched impedance connector made by AMP. They contain
all MSC8101 signals unbuffered. The pinout of these connectors is shown in MSC8101ADS Sche-
matics.
B•1•6

P6 - JTAG/OnCE Port Connector

P6 is a Motorola standard JTAG/ONCE connector for the DSP. It is a 14 pin 90
connector with key. The pinout of P6 is shown in
terconnect Signals"
below:
TABLE B1-6. P6 - JTAG/ONCE Connector - Interconnect Signals
Pin No.
Signal Name
1
TDI
2
GND
3
TDO
4
GND
5
TCK
6
GND
7
N.C.
8
KEY
B-92
Freescale Semiconductor, Inc.
Attribute
I
Host Data Strobe or Host Write Data Strobe. For further
explanation see P2/A24 in
Expansion - Interconnect Signals" above
I/O, P.U
MSC8101's Hard Reset. For further explanation see P1/C10 in
TABLE B1-2. "P1 - System Expansion - Interconnect
Signals" above
I/O, P.U
Power-On-Reset. For further explanation see P1/B20 in
B1-2. "P1 - System Expansion - Interconnect Signals"
above
.
P
+3.3V Power Out. These lines are connected to the main 3.3V
plane of the MSC8101ADS.
-
Not connected.
P
Digital GND. Main GND plane.
Attribute
I
Transmit Data In. This is the JTAG serial data input of the ADS,
sampled on the rising edge of TCK.
P
Digital GND. Main GND plane.
O
Transmit Data Output. This the MSC8101's JTAG serial data
output driven by Falling edge of TCK.
P
Digital GND. Main GND plane.
I
Test port Clock. This clock shifts in / out data to / from the
MSC8101ADS JTAG logic. Data is driven on the falling edge of
TCK and is sampled both internally and externally on it's rising
edge.
TCK is pulled up internally by the MSC8101.
P
Digital GND. Main GND plane.
-
Not Connected.
-
No pin in connector. Serve for correct plug insertion. Not
Connected.
MSC8101ADS RevB User's Manual
For More Information On This Product,
Go to: www.freescale.com
Description
TABLE B1-3. "P2 - CPM
.
TABLE B1-6. "P6 - JTAG/ONCE Connector - In-
Description
.
TABLE
o
two row header
MOTOROLA

Advertisement

Table of Contents
loading

Table of Contents