Panasonic KX-TDA50 Pc Programming Manual page 17

Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialize
Connection Settings for LAN
Setting
IP Address
Document Version 2010-11
2.1.1 Starting Maintenance Console and Software Modes
Values
COMx
2400, 4800, 9600, 19200,
38400, 57600, 115200
Values
1-9, 0, *, #, -, "," [comma], T, P,
W
Auto(Tone), Auto(Pulse),
Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
Values
1.0.0.0–223.255.255.255
Explanation
Specify the number of the COM port
assigned to the PC's RS-232C
interface. Only available COM ports are
displayed.
Specify the speed of data transmission.
Explanation
Enter the telephone number to be dialed
to access the PBX.
T: Converts the Dial Type from Pulse to
Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be
done with a connected telephone.
Enter a comment to identify the set of
values.
Specify the number of the COM port
assigned to the PC's modem interface.
Only available COM ports will be
displayed.
Specify the speed of data transmission.
Enter the modem initialize command,
and click Initialize to send the
command to the modem.
For more details, refer to your modem's
instruction manual.
Explanation
Specify the IP address of the PBX on
the LAN. Enter the same IP address
that was input in IP Address of
3.30 [1-1] Slot—Card Property -
CTILINK (KX-TDA100/KX-TDA200/
KX-TDA600 only).
PC Programming Manual 17