Panasonic KX-TDA50 Pc Programming Manual page 725

Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Networking Data Transfer
Feature Manual References
13.1.15 Private Network Features—NDSS (Network Direct Station Selection)
Network Data Transmission for Centralized Operator Feature—Data
Transmission ISDN->VoIP
Selects whether to re-send BLF data received from an ISDN port through any VoIP ports that are set to transmit
BLF data.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
11.3 [9-3] Network Operator (VoIP)—
Feature Manual References
13.1.15 Private Network Features—NDSS (Network Direct Station Selection)
Network Data Transmission for Centralized Operator Feature—Data
Transmission Counter
Specifies the maximum number of "hops", or transmissions between two PBXs, before a packet of BLF data
is discarded.
Default
8
Value Range
1–63
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
None
Document Version 2010-11
IP-GW Card Slot No. to notify BLF data to Network Operator
11.2 [9-2] Network Data Transmission
PC Programming Manual 725