Toshiba BU302MG Instruction Manual page 45

● Registers
Register Visibility
TestPattern Beginner
● Setting
- Select a test pattern output
Set the following value to "TestPattern" register. Setting value is Enumeration type.
The camera generates a test pattern.
● Note
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Access
R/W Selects a test pattern.
TestPattern
Off (*)
Black
White
GreyA
GreyB
GreyHorizontalRamp
GreyVerticalRamp
GreyScale
Description
function
Test pattern disable(Normal data output)
All pixel = 0 LSB
All pixel = 255 @Mono8
All pixel = 170 @Mono8
All pixel = 85 @Mono8
Horizontal Ramp
Vertical Ramp
Grey scale
* initial factory setting
44 / 81
http://www.toshiba-teli.co.jp/en/index.htm
D4253386A