Panasonic KX-TDA200 Features Manual page 288

1.25.2 PS Ring Group
–
KX-TCA355
–
KX-TD7680
–
KX-TD7684
–
KX-TD7685
–
KX-TD7690
–
KX-TD7694
–
KX-TD7695
•
Incoming trunk call information is shown on a PS display when a trunk call arrives at a PS ring group which
the PS joins. The display information can be selected on a PS ring group basis through system
programming: Called Party's Name/Number or Caller's Name/Number.
•
Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension number assigned
to the following groups:
Method
Incoming Call Distri-
bution Group
PS Ring Group
•
When a PS joins a PS ring group, the following personal settings are disregarded:
a.
When the PS ring group is called:
–
Delayed Ringing
–
Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
–
The setting which is assigned on the PS (e.g., FWD)
–
The status of the PS (e.g., busy)
b.
Log-in/log-out setting (from the PS ring group/from the incoming call distribution group which the PS
ring group belongs to). (® 1.2.2.7 Log-in/Log-out)
288 Feature Guide
Assignment
Assign all desired PSs to one
incoming call distribution
group, and set the group call
distribution method for the
group to "Ring".
® 1.2.2 Incoming Call Dis-
tribution Group Features
Assign all desired PSs to one
PS ring group.
Merit
All PS users in the
group can use the
Log-in/Log-out feature,
Wrap-up feature, and
ICD Group button for
the group.
Only one channel is
used when a call ar-
rives at the group.
Demerit
The CS may often be
busy as each PS in the
group uses one chan-
nel when a call arrives
at the group.
PS users in the group
cannot use the Log-in/
Log-out and Wrap-up
features.