Panasonic KX-TDA200 Features Manual page 347

Case 1:
Extension 1012 of PBX-1 dials extension number "1011".
® The dialled number is found at the local PBX, so extension 1012 of PBX-1 is connected to extension
1011 of PBX-1.
Case 2:
Extension 1012 of PBX-1 dials extension number "1033".
® The dialled number is not found at the local PBX, so the call is redirected to the specified TIE Line, and
extension 1012 of PBX-1 is connected to extension 1033 of PBX-2.
Case 3:
A public trunk call directed to extension 1033 arrives at PBX-1.
® The target extension number is not found at the local PBX, so the call is redirected to the specified TIE
Line, and the call is connected to extension 1033 of PBX-2.
–
Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to Enhanced
Version
–
System programming is required to enable this feature.
–
If a dialled number is not found at a remote PBX, the call cannot be redirected to the local PBX to
search for a matching number.
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy
tone. If required, Intercept Routing—Busy/DND can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
® 4.4 [2-3] Timers & Counters—Miscellaneous—
PC Programming Manual References
3.14 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan—
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Network Numbering
Plan— Trunk Property
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
3.25 [1-1] Slot—Port Property - E1 Port—
3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
4.4 [2-3] Timers & Counters—Miscellaneous—
4.8 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
4.8 [2-6-1] Numbering Plan—Main—Other PBX Extension
4.11 [2-7-1] Class of Service—COS Settings—TRS—
4.17 [2-9] System Options—Option 4—
Card Required)
5.1 [3-1-1] Trunk Group—TRG Settings—Main—
11.1 [9-1] TIE Table
12.2 [10-2] DIL Table & Port Settings
→DIL— Trunk Property
→DIL— DIL Destination—Day, Lunch, Break, Night
→DDI / DID / TIE / MSN
12.3 [10-3] DDI / DID Table—
Trunk Property
Incoming Call Inter-digit Timer—TIE
Private Network—TIE Call by Extension Numbering (Optional SD
COS
DDI / DID Destination—Day, Lunch, Break, Night
Incoming Call Inter-digit Timer—TIE
Trunk Property
TRS Level—Day, Lunch, Break, Night
1.30.1 TIE Line Service
Trunk Property
Trunk Property
Feature Guide 347