Changing The Prefix Number; Setting The Fax Logic (Sending And Receiving Sequence) - Brother MFC-L8650CDW Advanced User's Manual

Chapter 1

Changing the prefix number

a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
h
Press Dial Prefix.
i
Do one of the following using the
Touchscreen's keyboard.
 To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
 To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press .
6
Setting the Fax Logic
1
(sending and receiving
sequence)
You can change the process of manual fax
send or receive. If you often send or receive
a fax manually to/from the other party at the
end of a conversation, set the Fax Mode to
Easy Mode.
If you set to Easy Mode: You can send or
receive a fax manually just simply press Fax
Start. Make sure the other party's machine is
ready to send or receive a fax. If you are a caller,
press Fax Start to send a fax. If you are a
receiver, press Fax Start to receive a fax.
If you set to Advanced Mode: No matter you
are a caller or receiver, you can choose you will
send or receive a fax manually. When you press
Fax Start, the machine will ask you to
choose Send or Receive. If you want to send
a fax, press Send to send a fax. If you want to
receive a fax, press Receive to receive a fax.
NOTE
. Then press
a
b
c
d
e
f
g
h
i
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Fax Start.
Press .
Press All Settings.
Swipe up or down, or press a or b to
display Fax.
Press Fax.
Swipe up or down, or press a or b to
display Miscellaneous.
Press Miscellaneous.
Press Fax Mode.
Press Easy Mode or Advanced Mode.
Press .
1