Table of Contents
Advertisement
Installation Guide
5. Place the middle of each of the case's mount slots over the screw heads.
6. Slide the case down along the mounting surface to hang the mount slots on the screw heads.
7. Verify the unit has power by observing that the LEDs are lit or flashing.
CAUTION
If not using a 802.3af capable controller to power the AP 6522M,
ensure only the AP 6522M's designated power supply
(PWRS-14000-148R) is used to supply power to the access point.
Using an incorrectly rated power supply could damage the unit and
void the product warranty. Do not actually connect to the power
source until the cabling portion of the installation is complete.
11
Advertisement
Table of Contents
