Table of Contents
Advertisement
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 6).
Safety Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the Run
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
1. Safety interlock symbols
2. Hour meter
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system and to determine neutral position.
Figure 6
3. Battery light
Fuel Shut-off Valve
Close the fuel shut-off valve (near the engine) when
transporting or storing the mower.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch to drive the mower blades with the motion
control levers in the center, un-locked position. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down.
Ignition Switch
This switch is used to start the mower engine and has
three positions: Start, Run and Off.
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
13
Hide quick links:
Advertisement
Table of Contents
