Product Overview; Controls - Toro 74919TE Operator's Manual

Product Overview

5
4
3
2
1
11
1. Height-of-cut deck-lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 4 and Figure 5).
2
1
6
1. PTO Switch
2. Choke
3. Throttle control
6
7
8
9
10 G024147
Figure 4
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
11. Z Stand
3
4
Figure 5
4. Hour
meter/Safety-interlock
display/Fuel gauge
5. Ignition switch
6. Fuses
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance (Figure 6).
Fuel Gauge
The fuel gauge is located with the hour meter, and the bars
light up when the ignition switch is on (Figure 6).
The indicator light appears when the fuel level is
low—approximately 3.8 L (1 US gallon) remaining in the
fuel tank.
1. Fuel gauge (bars)
2. Battery light
3. Hour meter
Safety-interlock Indicators
5
There are symbols on the hour meter and the indicate with a
black triangle that the interlock component is in the correct
position (Figure 6).
Battery Indicator Light
When the ignition key is initially turned to the Run position
for a few seconds, the battery voltage will be displayed in the
area where the hours are normally displayed.
The battery light turns on when the ignition is turned on and
G008951
when the charge is below the correct operating level (Figure
6).
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
15
Figure 6
4. Safety-interlock symbols
5. Low-fuel indicator light