Replacing The Rotor - Toro 38302 Operator's Manual

Table of Contents

Advertisement

1. Screws
2. Remove and discard the old scraper.
3. Install the new scraper, and fasten it securely with the 4
screws that you previously removed.

Replacing the Rotor

1. Remove the screws that secure the right side plate to the
machine frame (Figure 15).
2. Remove the rotor pin (Figure 16).
1. Rotor pin
3. Remove the old rotor.
Figure 14
Figure 15
Figure 16
4. Install the new rotor by inserting the end of the rotor onto the
fitted end in the housing and rotating the rotor until it snaps
into place (Figure 17).
1. Fitted end of the rotor
Note: Ensure that the nut that secures the rotor pin remains
inside the recessed hole in the right inside wall of the
housing.
Note: The housing will flex when you install the rotor.
5. Tighten the bolt on the side of the housing.
6. Install the right side plate with the screws that you removed
in step 1.
Service
Toro has designed this machine to give you years of trouble-free
use. Should it need service, bring the machine to an Authorized
Toro Service Dealer, who is specially trained to repair Toro
products and will ensure that your Toro stays "all" Toro.
Double-insulated Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means for
grounding be added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of the system,
and should be done only by the qualified service personnel at
an Authorized Toro Service Dealer. Replacement parts for a
double-insulated appliance must be identical to the parts they
replace. A double-insulated appliance is marked with the words
"Double Insulation" or "Double Insulated." The symbol (square
within a square)
may also be marked on the appliance.
Product Information
A model and serial number decal is located on the housing.
Always refer to specific numbers on the decal in correspondence
or when you need replacement parts.
Service
Toro has designed this machine to give you years of trouble-free
use. Should it need service, bring the machine to an Authorized
9
Figure 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

1800 power curve

Table of Contents