Daily Maintenance Checklist - Toro 30807 Operator's Manual

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the safety interlock
operation.
Check the brake operation.
Check the engine oil level.
Check the cooling system
fluid level.
Drain the water/fuel
separator.
Check the air filter, dust cup,
and burp valve.
Check for unusual engine
noises. 2
Check the radiator and
screen for debris
Check for unusual operating
noises.
Check the hydraulic system
oil level.
Check the hydraulic hoses
for damage.
Check for fluid leaks.
Check the fuel level.
Check the tire pressure.
Check the instrument
operation.
Check the height-of-cut
adjustment.
Lubricate all the grease
fittings. 2
Touch-up any damaged
paint.
1 Check the glow plug and injector nozzles if starting is hard, there is excess smoke, or rough running is noted.
2 Immediately after every washing, regardless of the interval listed.
Important: Refer to your engine Operator's Manual for additional maintenance procedures.
Note: Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy of the schematic by
visiting www.Toro.com and searching for your machine from the Manuals link on the home page.
For the week of:
Mon. Tues. Wed. Thurs.
38
Fri. Sat. Sun.