Maintenance; Recommended Maintenance Schedule(S) - Toro 22323 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 400 hours
Every 500 hours
Every 600 hours
Every 1,500 hours
Yearly
Yearly or before storage
Every 2 years
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Maintenance Procedure
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Check and adjust the track tension.
• Check the engine oil level.
• Check the cooling system.
• Grease the traction unit. (Grease immediately after every washing.)
• Check the air filter service indicator.
• Drain water and other contaminants from the fuel filter/water separator.
• Clean the tracks.
• Check the tracks for excessive wear (If the tracks are worn, replace them.)
• Clean the radiator.
• Remove debris from the traction unit.
• Check for loose fasteners.
• Check the hydraulic fluid level.
• Remove air cleaner cover, clean out debris, and check the air filter service indicator.
• Change the engine oil.
• Check the battery electrolyte level (replacement battery only).
• Check the battery cable connections.
• Check and adjust the track tension.
• Check the cooling system hoses.
• Check the alternator/fan belt tension (refer to the Engine Operator's Manual for
instructions).
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Check for dirt build-up in the chassis.
• Change the oil filter.
• Replace the hydraulic filter.
• Check and grease the road wheels.
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Replace the fuel filter canister and in-line filter.
• Change the hydraulic fluid.
• Replace the alternator/fan belt (refer to the Engine Operator's Manual for
instructions).
• Replace the safety air filter.
• Replace all moving hydraulic hoses.
• Change the engine coolant (Authorized Service Dealer only).
• Check the condition of the hydraulic pump belt.
• Check and adjust the track tension.
• Touch up chipped paint
• Drain and clean the fuel tank (Authorized Service Dealer only).
26