Starting And Stopping The Engine - Toro 74939 Operator's Manual

1
2
G008948
Figure 17
1. On 2. Off
Starting and Stopping the
Engine
Starting the Engine
1. Raise the ROPS up and lock them into place. Sit on the
seat and fasten the seat belt (Step 1 in Figure 18).
2. Move the motion controls to the neutral locked
position (Step 2 in Figure 18).
3. Set the parking brake; refer to Setting the Parking Brake
(page 18) (Step 3 in Figure 18).
4. Move the blade control switch (PTO) to the Off
position (Step 4 in Figure 18).
5. Move the throttle lever midway between the Slow and
Fast positions (Step 5 in Figure 18).
6. Turn the ignition key to the Start position (Figure 19).
When the engines starts, release the key.
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start, allow
a 15 second cool-down period between attempts.
20
Figure 18
g017006