Step
3
Installing the Bumper
Parts needed for this step:
1
Bumper
Procedure
Note: This procedure is only needed for Model
No. 07264TC.
1. Remove the 2 bolts, washers, and nuts secured
to the front of the frame.
2. Align the mounting holes and secure the
bumper to the frame with the fasteners
previously removed (Figure 5).
Figure 5
1. Bumper
Step
4
Installing the Seats
Parts needed for this step:
2
Seat
Procedure
Note: This procedure is only needed for Model
No. 07264TC.
Insert the seat bracket into the seat base opening
and pivot the seat downward (Figure 6).
1. Seat bracket
Step
5
Installing the Hitch
Parts needed for this step:
1
Hitch
Procedure
Note: This procedure is only needed for Model
No. 07264TC.
1. Remove the 4 bolts and nuts from the inside
rear of the frame.
2. Align the hitch with the mounting holes on the
frame. Secure the hitch with the screws and
nuts (Figure 7).
13
Figure 6
2. Seat base