104-8324
1. Raise cutting units
104-8325
1. Lock/unlock the cutting unit service lock.
112-9118
1. Warning—read the Operator's Manual.
2. Warning—lock the parking brake, stop the engine, and
remove the ignition key before leaving the machine.
3. Warning—wear the seat belt when seated in the operator's
position.
4. Cutting hazard of hand or foot—stay away from moving
parts.
5. Tipping hazard—lower the cutting unit when driving down
slopes; slow machine before turning, do not turn at high
speeds
6. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Lower cutting units
(Affix over part no. 112–9118 for CE*)
* This safety decal includes a slope warning required on the machine
for compliance to the European Lawn Mower Safety Standard EN836:1997. The
conservative maximum slope angles indicated for operation of this machine are
prescribed by and required by this standard.
1. Warning—read the Operator's Manual.
2. Warning—lock the parking brake, stop the engine, and
remove the ignition key before leaving the machine.
3. Warning—wear the seat belt when seated in the operator's
position.
4. Cutting hazard of hand or foot—stay away from moving
parts.
5. Tipping hazard—lower the cutting unit when driving down
slopes; do not drive on slopes greater than 15 degrees.
6. Thrown object hazard—keep bystanders a safe distance
from the machine.
1. Engine coolant under pressure
2. Explosion hazard—read the Operator's Manual.
3. Warning—do not touch the hot surface.
4. Warning—read the Operator's Manual.
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
10
106–6752
106-6753
106-6754