Toro 74310 Operator's Manual page 10

With 42in or 48in direct-collect cutting unit
Hide thumbs Also See for 74310:
Table of Contents

Advertisement

116-8946
1. Rotate counterclockwise
to release.
2. Rotate clockwise to lock.
1. Read the Operator's Manual before performing any
maintenance.
2. Check engine oil every 8 hours.
3. Grease front caster wheel bearings every 8 hours.
4. Check hydraulic fluid level every 40 hours (only use
recommended hydro oil).
5. Check tire pressure every 40 hours.
6. Grease deck drive PTO every 40 hours.
7. Check air cleaner every 40 hours.
3. Unlock to push the
machine.
4. Read the instructions
before servicing or
performing maintenance.
116-9044
8. Grease deck lock mechanism every 100 hours.
9. Grease deck pivots every 100 hours.
10. Check gearbox oil every 100 hours (use only Mobil 1 75W-90
gear oil).
11. Grease front caster pivots every 500 hours.
12. Grease rear caster pivot every 500 hours.
13. Grease rear caster wheel every 500 hours.
14. Grease belt idlers every 500 hours.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74312Z master 8000 series74313

Table of Contents