Sound Pressure Level; Sound Power Level; Vibration Level; Safety And Instruction Decals - Toro 30411 Operator's Manual

Sound Pressure Level

This unit has an equivalent continuous A–weighted sound
pressure level at the operator ear of 89 dBA, based on
measurements of identical machines per Directive
98/37/EC and amendments.

Sound Power Level

This unit has a guaranteed sound power level of
105 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
106-6764
1. To start the engine, move the traction pedal to Neutral, press
the brake pedal, move the throttle lever to Fast, turn the ignition
key to On, and then turn the ignition key to Start; read the
Operators Manual.
2. To stop the engine, move the throttle lever to slow, disengage
the PTO, set the parking brake, wait 5 minutes, turn the ignition
key to Stop, and remove the key; read the Operators Manual.
3. Read the Operators Manual.
4. To engage the PTO, pull up on the PTO switch and move it
forward.
5. To disengage the PTO, move the PTO switch back.
6. To switch the transmission to high speed, raise the attachment
lift and switch the speed control to High.

Vibration Level

Hand-Arm
This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines per
ISO 5349 procedures.
Whole Body
This unit does not exceed a vibration level of 0.5 m/s
the posterior based on measurements of identical machines
per ISO 2631 procedures.
1. Read the operator's
manual.
1. Cutting/dismemberment hazard—stay away from moving parts.
7
2
2
93-7275
2. Do not use starting aids.
93-7272
at
at