Toro 03540 Operator's Manual page 16

Controls
Charge Indicator (Fig. 10)—Illuminates when
system charging circuit malfunctions.
Key Switch (Fig. 10)—Three positions: OFF,
ON/Preheat and START.
Throttle Control (Fig. 10)—Move the control
forward to increase engine speed, rearward to
decrease speed.
Enable/Disable Switch (Fig.10)—Used in with the
lower mow/raise control lever to operate reels.
Backlap Switch (Fig. 11)—Used with lower mow/
raise control lever for backlapping operation.
Figure 11
1. Backlap Switch
Reel speed Controls (Fig. 12)—Control rpm of the
front and rear cutting units. The #1 position is for
backlapping. The remaining settins are for mowing
operations.
16
Figure 12
1. Reel speed controls
Hour Meter (Fig. 13)—Shows the total hours the
machine has been operated.
Figure 13
1. Hour meter
Brake Pedals (Fig. 14)—Two foot pedals operate
individual wheel brakes for turning assistance,
parking and to aid in sidehill traction. A Locking
pin connects the pedals for parking brake operation
and transport.
Parking Brake Latch (Fig. 14)—A knob on the left
side of the console actuates the parking brake lock.
To engage the parking brake, connect the pedals
with the locking pin, push down on both pedals and
pull the parking brake latch out. To release the
parking brake, depress both pedals until the parking
brake latch retracts.
1
1