Specifications - Toro 03540 Operator's Manual

Specifications

Engine: Kubota three-cylinder, 4-cycle, liquid-
cooled diesel. 18.6 kW (25 hp) @ governed to 3200
rpm; 1123 cc displacement. Heavy-duty, 3-stage,
remote-mounted air cleaner. High water temperature
shutdown switch.
Cooling System: Radiator capacity is 7.1 l (7.5 qt.)
of 50/50 mixture of ethylene glycol anti-freeze.
Remote mounted .9 l (1 qt.) expansion tank. A two-
speed fan drive controls air flow.
Fuel System: Fuel tank capacity is 37.9 l (10 gal.)
of #2 diesel fuel. Equipped with a fuel filter/water
separator to capture water in the fuel.
Traction System: Foot pedal controls forward/
reverse ground speed. Ground speed: 0–16.1 kmh
(0–10 m.p.h.) forward and 0–6.4 kmh (0-4 mph)
reverse. Hydrostatic transmission mounted directly
on a 20.9:1 ratio front axle. Axle/reservoir capacity
is 4.7 l (5 qts). Replaceable filter mounted directly
on transmission housing. Model 03541—
Mechanical rear axle is coupled to the front axle by
a drive shaft and overrunning clutch.
Cutting Unit Drive System: Hydraulic reel motors
feature quick disconnects to ease
removal/installation on cutting units. Hydraulic
fluid reservoir capacity is 32.2 l (8.5 gal.). System
protected by a filter assembly with service indicator.
Seat: Deluxe high back seat with adjustable fore
and aft travel, weight and height. Tool box at the left
side of the seat.
Steering System: Power steering with dedicated
power source.
Tires: Two rear tires: 19 x 8.50-8, tubeless, 4-ply
rating. Two front tires: 26 x 12.00-12 tubeless, 4-
ply rating. Recommended tire pressure for the front
and rear tires is 69–103 kPa (10–15 psi).
Brakes: Individual drum-type wheel brakes on the
front traction wheels. Brakes controlled by
individual pedals operated by the left foot.
Hydrostatic braking through traction drive.
Electrical System: Automotive type electrical
system. 12-volt, maintenance free battery with 530
cold cranking Amps @ –18°C (0° F) and 85 minute
reserve capacity @ 29° C (85° F). 40-amp alternator
with regulator/rectifier. Seat switch, reel and
traction interlock switches. An electronic controller
monitors and controls safety and operational
functions.
Controls: Foot-operated traction and brake pedals.
Hand-operated throttle, traction speed control lever,
parking brake lock, ignition switch with automatic
preheat cycle, single joy stick control for cutting unit
on/off and lift/lower. Cutting unit backlap switch and
reel speed controls located under the operator seat.
Gauges: Hour meter, speedometer, fuel gauge,
temperature gauge. 4 warning lamps: oil pressure,
water temperature, amps and glow plug.
General Specifications (approx.):
Width-of-Cut :
Overall Width:
Transport
Outside of tires
Overall Length:
Without grass baskets:
With grass baskets:
Height:
With Rollover protector:
Without
Recommended Height-of-Cut:
5-Blade Cutting Unit:
8-Blade Cutting Unit: 0.4–1.6 cm (1/4–5/8 in.)
Weight: Model 03502
Model 03504
Model 03530
Model 03531
*With 8-Blade Cutting Units, baskets & full
fluid levels
Optional Equipment
5-Blade Cutting Unit, Model No. 03505
8-Blade Cutting Unit, Model No. 03508
Grass Basket Kit, Model No. 03513
241 cm (95 in.)
220 cm (87 in.)
208 cm (82 in.)
263 cm (103.5 in.)
294 cm (116 in.)
214 cm (84.5 in.)
142 cm (56 in.)
1–1.9cm (1/2–3/4 in.)
821 kg (2,200 lbs.)*
952 kg (2,550 lbs.)*
868 kg (2,325 lbs.)*
998 kg (2,675 lbs.)*
9