Deleting A Nuisance Channel; Restoring A Nuisance Channel - Motorola APX 3000 User Manual


Deleting a Nuisance Channel†
If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Note: Deleting a "nuisance" channel is only possible through
the preprogrammed Nuisance Channel Delete
button.
Procedure:
1
Press and hold the preprogrammed Scan button to delete
the nuisance channel.
OR
When your radio is locked onto the channel to be deleted,
press the preprogrammed Nuisance Delete button.
2
Your radio continues scanning the remaining channels in the
list.


Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, do one of the
following:
•
Turn your radio off and then turning it on again.
OR
•
Stop and restart a scan via the preprogrammed Scan button.
OR
•
Mode change to another channel and back to the original
channel.
39
English