Call Alert Paging; Receiving A Call Alert Page; Emergency Operation - Motorola APX 3000 User Manual

Call Alert Paging†‡
This feature allows your radio to work like a pager.
Note: This feature must be preprogrammed by a qualified
radio technician.


Receiving a Call Alert Page

Procedure:
1
When you receive a Call Alert page, you hear four repeating
alert tones and the LED blinks green.
2
The backlight of the screen turns green and the display
briefly shows PAGE RCV.
You cannot send a Call Alert page.
40
English
Emergency Operation†‡
The Emergency feature is used to indicate a critical situation.
If the Top button is preprogrammed to send an emergency
signal, this signal overrides any other communication over the
selected channel.
Your radio supports the following Emergency modes:
•
Emergency Alarm
•
Emergency Call (Trunking Only)
•
Emergency Alarm with Emergency Call
•
Silent Emergency Alarm
Check with your dealer or system administrator for more
information on the programming of this feature.
Only one of the Emergency modes above can be assigned to
the preprogrammed Emergency button.
Note: To exit emergency at any time, press and hold the
preprogrammed Emergency button until your radio
exit emergency. The timer of this long press can be
preprogrammed. Consult the qualified technician to
program the duration required.