Sanyo PLC-WXU30 Owner's Manual page 173

[2] Control by the web browser
* PC provides the Network Capture.
PC1 PC2
PC3 PC4
Select "Network" as input mode previously.
1
Access to the control page of the projector by using the web
browser. From the Network menu, click Capture tab to display
the setting page.
2
Select the computer number from the pull-down menu button
of "Connecting PC" and click Start button. The screen image of
the selected computer will appear on the projected screen in real
time.
• To stop capturing, click One-shot button. The captured image
of the computer on the screen is frozen.
• To restart capturing, click Start button.
3
To end capturing, click End button.
Item
Interrupt connection...............Set enable or disable the real time capturing connec-
The IP address of the connecting PC should be registered previously (
If the error message appears, check item "Parameter set up" (
To use the capture function from the web browser or projector, the Network Capture 4 on the captured
computer must be activated.
PJ1
Capture
PC5
Project a screen
image of PC1 with
PJ2.
Description
tion from other computers during executing the real
time capturing operation.
Using the real time capture
PJ2
* Start capturing of
PC6
the PC1 from the
PC5.
Set "On" when
using the wireless
mouse function
p.89).
p.88).
91