Alarm Setting; Alarm Time Setting; Turning On/Off The Alarm; Activating Snooze - Panasonic CQ-BT5107U Operating Instructions Manual

Alarm Setting

[ALM]

Alarm time setting

1
Hold down [ALM] (Alarm) for more than 2
seconds.
"ALM ADJ" is displayed when the alarm time is
not adjusted.
2
Hold down [ALM] for more than 2 seconds
after the above display is shown.
3
Adjust the hour.
[d] : Sets ahead.
[s] : Sets back.
4
Push [ALM].
5
Adjust the minute.
[d] : Sets ahead.
[s] : Sets back.
6
Push [ALM] to complete.
The alarm is set to ON automatically after
complete alarm time setting.
Alarm indicator ( ) lights.
Notes :
¡ a
When the clock ( page 9) is not set, perform
and complete the alarm time setting, the clock
time will set to "PM 1:00" automatically. Please
readjust the clock time depending on the actual
clock time.
¡
Hold down [d] or [s] to change numbers
rapidly.
¡
When you want to readjust the alarm time, repeat
steps 1 to 6 .

Turning ON/OFF the alarm

1
Hold down [ALM] for more than 2 seconds.
(Alarm time display)
2
Push [ALM].
3
Turn [ALM] clockwise or counterclockwise to
select alarm ON or OFF, then push [ALM]
Hour blinks
again to confirm the setting.
(Select alarm ON,
Notes :
¡
Before turn ON the alarm, make sure the alarm
time is set. Failure to heed this will cause invalid
selection of alarm ON.
Hour entered
¡
Hold down [ALM] for more than 2 seconds
when the alarm is sounding also turns off the
alarm.
¡
Access of alarm ON/OFF is available by push
Minute blinks
[ALM] in the "Alarm time display".

Activating snooze

Press any button on this unit when the alarm is
sounding.
Minute entered
The alarm will sound again in 9 minutes.
Completed
Note : If you do not turn the alarm off when the
alarm is sounding, the alarm sound will shut off
after an hour. (including the amount of time the
alarm was postponed (snooze))
[s] / [d]
(Alarm time display)
(Alarm ON/OFF setting)
lights.)
CQ-BT5107U
21