Securing Of The Main Unit - Panasonic CQ-BT5107U Operating Instructions Manual

Installation Guide (continued)

Securing of the main unit

Caution
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Engage the Mounting
Springs in the mount-
ing holes of the
Mounting Collar q
firmly.
Mounting Spring
34
CQ-BT5107U
Mounting springs
Mounting
Hole
correctness.(a page 36)
Insert Mounting Collar q into the dash-
1
board, and bend the mounting tabs out
with a screwdriver.
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:
q Mounting
Collar
Mounting Holes
Mounting Bolt
Establish the rear connection of the unit.
2
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
3
After installation reconnect the negative
(–) battery terminal.
Tab