Speaker Connections - Panasonic CQ-BT5107U Operating Instructions Manual

Speaker Connections

Caution
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
<Right>
(White)
+
+
L
-
-
(White/Black)
(Gray)
+
+
R
-
-
(Gray/Black)
<Wrong>
+
+
L
-
-
Chassis
+
+
R
-
-
Chassis
• Never connect the speaker cord to
the body of the car.
• Use ungrounded speaker only.
• The maximum speaker input should be 45 W or more. (If used with the optional power
amplifier, the speaker input should be higher than the maximum amplifier output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately using
parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
+
L
-
+
R
-
• Do not use a 3-wire type speaker
system having a common earth
lead.
+
+
L
-
-
+
+
R
-
-
• Do not connect more than one
speaker to one set of speaker leads.
+
+
- -
+
+
- -
37
CQ-BT5107U