Viewing And Clearing The Bluetooth Device Information - Motorola APX 7000 User Manual

Your radio can only control the volume of MCW and
OCW Bluetooth enabled audio device. If the radio is
paired with other Bluetooth enabled audio device, its
volume is independent from the APX radio. In this
case, the volume is only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows Volume XX, and you hear
a short, medium-pitched tone.

Viewing and Clearing the Bluetooth Device Information

1
or to BT. Press the Menu Select button directly
below BT to access the Bluetooth feature screen.
2
or to Devices.
Once the display highlights the Devices, the
display shows XX connected alternates with XX
paired.
3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected,
or along the list of <Device Friendly Name>
to see the status of each device.
154
English
If there are no active Bluetooth devices being
paired or connected, the display shows No
devices.
5 Perform one of the following actions:
• To clear the device from the list,
required device, press the Menu Select button
directly below Clr.
• To exit from this function, press the Menu
Select button directly below Back to return to
the previous screen without deleting the device
name.
If Clr is selected, the display shows <Device
Friendly Name> clear?.
6 Press the Menu Select button directly below Yes
or No to proceed delete the device or to exit this
function and return to previous screen..
If the device is deleted successfully, the display
shows <Devlice Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the
radio sounds a short, low-pitched tone. The display
or to the