Scenario Of Changing From Lte-Enabled Channel To Lte-Disabled Channel - Motorola APX 7000 User Manual

Off
No Service
[3]
Service Error
[3]
LTE HW error
[3]
VPN auth error
Service fatal
[4]
error
• The definitions of different statuses shown below
the Network of LTE screen:
<Network name> The currently connected LTE
network name.
Unavailable No LTE network connected
currently.
3
Bring the radio to the qualified technician to check the issue if the error persists.
4
You can try to power on your radio again to reinitiate the LTE function. If this error persists, bring your radio to the
qualified technician to verify the issue.
LTE communication of the
radio is currently off.
No LTE service detected at
the current site.
There is an LTE service
error.
There is an LTE hardware
error.
Incorrect key installed for
VPN.
LTE function has come to a
stall.
• The definitions of different statuses shown below
the Signal Strength of LTE screen:
Please wait
Unavailable
Rating of the
signal strength
Scenario of Changing from LTE-enabled Channel to
LTE-disabled Channel
When entering a non-LTE channel the status field in
the LTE screen shows Disabled. Press or press and
hold of the LTE button prompts short, low-pitched
tone.
The radio is trying to connect
to an LTE modem.
The radio does not have an
LTE connection currently.
You see one of the following
rating when LTE is connected:
Excellent > Good > Fair >
Poor
English
169