Data Profiles Available For Lte; Turning On The Lte At The Lte Menu Screen - Motorola APX 7000 User Manual

System Operation Scenarios
The radio can still operate on 700MHz
LMR where the LMR voice and data are
available to the user.
LTE is operational again when the
frequencies are switched back to either a
VHF or a 800 MHz LMR frequency.
The LTE feature can be preprogrammed to a
programmable button for quick access to LTE screen
or to activate LTE feature. The LTE button must be
preprogrammed by a qualified technician before user
can use it.

Data Profiles Available for LTE

There are three different profiles available for LTE
data operation.
Broadband
Only
Trunking and
Broadband
166
English
Use only LTE data transmission
network. In the absence of LTE
coverage, the radio has no data
functionality.
Use LTE data transmission
network when available. When
LTE is not available or turned off,
the radio falls back to using IV&D
LMR data, if available. Once LTE
coverage becomes available
again, the radio reverts back to
using LTE data transmission
network.
Conventional Use LTE data transmission
and network when available. When
Broadband LTE is not available or turned off,
the radio falls back to using
Conventional LMR data, if
available. Once LTE coverage
becomes available again, the radio
reverts back to using LTE data
transmission network.

Turning On the LTE at the LTE Menu Screen

1 Perform one of the following actions:
• Press the LTE button to enter the LTE screen.
•
or to LTE. Press the Menu Select button
directly below LTE to enter the LTE screen.
If LTE modem is not ready or busy setting up, the
display shows Please wait. Once the LTE