Configuring Dvx2 - D-Link DVX-1000 User Manual

Go to 'Call Server->Routes'
•
Click on '
•
following route
Route from PSTN and INET gateway users to local users of
•
DVX2

20.1.2 Configuring DVX2

•
Configure user extensions – Add user extensions 200 to 299 to DVX2
and add them to the 'LocalRouteGroup'. Please note that the first digit of all
the extensions are '2', this is done so that all of them will match a single
route from DVX1 to DVX2.
•
Add DVX gateway – Add the DVX gateway as shown below and assign it
to the 'LocalRouteGroup'. The 'SIP user ID', 'Username' and 'Password' used
in the Registration parameters should be the one used when the DVX
gateway was added to DVX1 (Section 20.1.1).
D-Link Confidential
' icon for RestrictedRouteGrp and add the
46
DVX-1000 User Manual