Yamaha FJR1300AS Owner's Manual page 52

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Rider seat height position adjuster
3. Move the rider seat holder cover
to the lower position as shown.
1. Rider seat holder cover
4. Install the rider seat height posi-
tion adjuster so that the "H" mark
is aligned with the match mark.
1
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
the rider seat into seat holder B as
shown.
1
1. Projection
2. Seat holder B (for high position)
3. Rider seat holder cover
6. Align the projection on the bottom
2
H L
3
1. "H" position slot
7. Install the passenger seat.
To change the rider seat height to
the low position
1. Remove the rider seat. (See page
2. Remove the rider seat height posi-
3. Move the rider seat holder cover
4. Install the rider seat height posi-
3-37
of the rider seat with the "H" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
3-35.)
tion adjuster by pulling it upward.
to the upper position.
tion adjuster so that the "L" mark
is aligned with the match mark.