Adjusting Image - JVC TK-C8301RU Instructions Manual

Adjusting Image

After mounting the camera, adjust the images while looking at the
actual image. Discharge the static electricity from your body by touching
the metallic part of the monitor terminal before handling the camera as
static electricity may cause the camera to malfunction.
1 Remove the lens cover.
① Press the mark of the lens cover (either left or right) from top and
bottom, and remove one of the catches from the camera.
② Remove another catch from the camera.
Do not pull the lens cover too hard. The fall prevention sheet
Note
may be detached from the camera.
When removing the lens cover, make sure to pull it straight
forward to avoid hitting the lens. It may cause malfunction if
the lens cover hits the lens.
2 Adjust the camera direction for shooting.
Aim the camera in the shooting direction.
Do not hold the lens while adjusting the camera direction.
Note
Doing so may damage the lens.
3 Adjust the image size.
Adjust the image size by loosening the fastening screw of the zoom
adjustment ring and moving the ring to the left/right. Tighten the
fastening screw after the adjustment is completed.
1
<Continued on the following page>
Setting/Adjustment
E-23