Epson EMP-1815 User Manual page 52

List of Functions
When WEP is selected
Sub Menu
WEP encryption You can set the encryption for WEP encoding.
128 bit: Uses 128 (104) bit encoding
64 bit: Uses 64 (40) bit encoding
Format You can set the input method for the WEP encrypted key.
ASCII: Input text.
HEX: Input in hexadecimal.
Key ID
Selects the WEP encryption ID key.
Encryption key 1/ You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for
Encryption key 2/ the network in which the projector participates. The type of character and the number that can be entered differ according to the "WEP Encryption"
Encryption key 3/ and "Format" settings.
Encryption key 4 If the number of characters you enter is shorter than the required character length, no character is encrypted. If the number of characters you enter is
longer than the required character length, characters that exceed the permitted number are not encrypted.
"128 bit" - when "ASCII": Single-byte alphanumerics, up to 13 characters max.
"64 bit" - when "ASCII": Single-byte alphanumerics, up to 5 characters max.
"128 bit" - when "HEX": 0 to 9 and A to F, up to 26 characters
"64 bit" - when "HEX": 0 to 9 and A to F, up to 10 characters
Downloaded from ProjectorsManual.com Manuals
Function
52